연구

  • 기계진단실험실
  • 자동차 동력 시스템 실험실
  • 멀티스케일소음진동실험실
  • 메카트로닉스실험실
  • 성형가공실험실
  • 열유동제어실험실
  • 자동제어실험실
  • 전산유체실험실
  • 전산응용역학실험실
  • 지능형다중스케일설계가공실험실
  • AML실험실
  • 소개

소개

자연모사실험실(Multiscale Bio-inspired Technology Lab.)

지도교수 소개
강대식교수

강대식 (Daeshik Kang, Ph.D.)

  • Address: #442, Sung Ho Hall, Ajou University, Suwon 16499, Korea. (성호관 442호)
  • Email: dskang@ajou.ac.kr
            82-31-219-2345
  • Homepage: most.ajou.ac.kr
  • 2016~present, Assistant Professor, Mechanical Engineering, Ajou Univ.
  • 2016, Post-Doc., Materials Science and Engineering, UIUC
  • 2014, Ph.D., Mechanical Engineering, Seoul National Univ.
  • 2011, M.S., Mechanical Engineering, Seoul National Univ.
  • 2007, B.S., Department of Physics, Seoul National Univ.
이병옥 교수 사진

고제성 (Je-Sung Koh, Ph.D.)

  • Address: #403, Sung Ho Hall, Ajou University, Suwon 16499, Korea. (성호관 403호)
  • Email: jskoh@ajou.ac.kr
            82-31-219-2353
  • Homepage: most.ajou.ac.kr
  • 2017~present, Assistant Professor, Mechanical Engineering, Ajou Univ.
  • 2017, Post-Doc., School of Engineering and Applied Sciences, Harvard Univ.
  • 2014, Ph.D., Mechanical Engineering, Seoul National Univ.
  • 2008, B.S., Mechanical Engineering, Seoul National Univ.
이병옥 교수 사진

한승용 (Seungyong Han, Ph.D.)

  • Address: #401, Sung Ho Hall, Ajou University, Suwon 16499, Korea. (성호관 401호)
  • Email: sy84han@ajou.ac.kr
            82-31-219-2345
  • Homepage: most.ajou.ac.kr
  • 2017~present, Assistant Professor, Mechanical Engineering, Ajou Univ.
  • 2017, Post-Doc., Materials Science and Engineering, UIUC
  • 2015, Ph.D., Mechanical Engineering, KAIST
  • 2011, M.S., Mechanical Engineering, KAIST
  • 2010, B.S., Mechanical Engineering, Ajou University
연구원 소개
  • 오기승

    이은한

  • 김민수

    홍인식

  • 안기현

    이은한
  • 김태위

    이은한
  • 김민수

    김동진

  • 김민수

    노연욱

  • 김민수

    김기백

  • 김민수

    김성연

  • 김민수

    김창환

  • 김민수

    임성훈

  • 김민수

    박지은

  • 김민수

    김민호

연구원 E-mail
학술대회 활동 및 연구 실적

논문실적

 

자연모사 실험실 연구실적
1 Soft, skin-mounted microfluidic systems for measuring secretory fluidic pressures generated at the surface of the skin by eccrine sweat glands, Small, 2017.
2 Dry Transient Electronic Systems by Use of Materials that Sublime, Adv. Funct. Mater., 2017.
3 Thin, Soft, Skin-Mounted Microfluidic Networks with Capillary Bursting Valves for Chrono-Sampling of Sweat, Adv. Healthc. Mater., 2017.
4 Ultra-sensitive Pressure sensor based on guided straight mechanical cracks, Sci. Rep., 2017.
5 Artificial Slanted Nanocilia Array as a Mechanotransducer for Controlling Cell Polarity, ACS Nano, 2017.
6 Collapse of microfluidic channels/reservoirs in thin, soft epidermal devices, Extreme Mechanics Letters, 2016.
7 Skin-Like, Wearable Microfluidic Systems Capable of Capture, Storage and Colorimetric Sensing of Sweat, Sci. Transl. Med., 2016.
8 Transparent ITO mechanical crack-based pressure and strain sensor. J. Mater. Chem. C, 2016.
9 Dramatically Enhanced Mechanosensitivity and Signal‐to‐Noise Ratio of Nanoscale Crack‐Based Sensors: Effect of Crack Depth, Adv. Mater., 2016.
10 Directional Clustering of Slanted Nanopillars by Elastocapillarity, Small, 2016.
11 Soft core/shell packages for stretchable electronics, Adv. Funct. Mater., 2015.
12 Ultrasensitive mechanical crack-based sensor inspired by the spider sensory system, Nature, 2014.
13 Shape-Controllable Microlens Arrays via Direct Transfer of Photocurable Polymer Droplets, Adv. Mater., 2012.
14 Analysis of preload-dependent reversible mechanical interlocking using beetle-inspired wing locking device, Langmuir, 2012.
15 Bioinspired Reversible Interlocker Using Regularly Arrayed High Aspect-Ratio Polymer Fibers, Adv. Mater., 2012.
16 Arrays of Lucius microprisms for directional allocation of light and autostereoscopic three-dimensional displays, Nat. Commun., 2011.

학술대회 발표실적

 

자연모사 실험실 연구실적
1 Ultra-high Sensitive Sensors Inspired from Sensory Organs in Nature, 한국진공학회 동계정기학술대회, 2018.
2 초정밀 나노스케일 센서기술(strain, crack, 진동, 압력 등), 대형사업단 성과활용지원사업 기술 이전을 위한 설명회, 2017.
3 Bio-inspired Design and Fabrication in Mechanical Engineering, KIST 전북 분원 ‘창의 연구회’ 세미나, 2017.
4 Bio-inspired Epidermal Sensor for Healthcare Monitoring, Department of Bio and Brain Engineering (KAIST), 2017.
5 건강 진단을 위한 웨어러블 땀 센서, 대한기계학회 유망과학기술자 세션 (바이오공학부문), 2017.
6 기계공학 기반 자연모사 미세공정 설계, 인천대학교 세미나, 2017.
7 Ultra-high Sensitive Sensors Inspired from Sensory Organs in Nature, 한국 진공학회 반도체 및 박막분과 춘계 워크샵, 2017.
8 Bio-inspired Design and Fabrication in Mechanical Engineering, 아주대 분자과학기술학과 세미나, 2017.
9 셀프 힐링 고분자를 이용한 나노스케일 크랙센서의 획기적 내구성 향상, 제19회 KMEMS 학술대회, 2017.
10 Ultrasensitive Spider-inspired Crack Sensor and Its Applications, 대한기계학회 유망과학기술자 발표, 2016.
11 Unconventional Approaches about Conventional Material for Highly Sensitive Recognition System, 아주대학교 물리학과 세미나, 2016.
12 기계공학 기반 자연모사 미세공정 설계, 포항공대 기계공학과 2016-2학기 정기세미나, 2016.

논문실적

 

자연모사 실험실 연구실적
1 Mark Ilton, Saad Bhamla, Xiaotian Ma, Suzanne Cox, Leah L Fitchett, Yongjin Kim, Je-sung Koh, Deepak Krishnamurthy, Chi-Yun Kuo, Fatma Zeynep Temel, Alfred Crosby, Manu Prakash, Gregory P Sutton, Robert J Wood, Emanuel Azizi, Sarah Bergbreiter, SN Patek, “The principles of cascading power limits in small, fast biological and engineered systems”, Science, Vol.360, Issue. 6387, eaao1082, 2018.
2 Hayley McClintock, Fatma. Z. Temel, N. Doshi, Je-Sung Koh, Robert. J. Wood, “The milliDelta: A high- bandwidth, high-precision, millimeter-scale Delta robot”, Science Robotics, vol.3, no.14, 2018.
3 Mustafa Boyvat*, Je-Sung Koh*, Robert J. Wood*, “Addressable wireless actuation for multijoint folding robots and devices”, Science Robotics, vol. 2, no. 8, 2017.
4 Yong-Jai Park, Jong-Gu Lee, Sangwon Jeon, Heejin Ahn, Je-Sung Koh, Junghyun Ryu, Maenghyo Cho, and Kyu-Jin Cho, “‘Dual-stiffness structures with reconfiguring mechanism: Design and investigation”, Journal of Intelligent Material Systems and Structures, vol. 27, no. 8, pp. 995-1010, 2016
5 Je-Sung Koh*, Eunjin Yang*, Gwang-Pil Jung, Sun-Pill Jung, Jae Hak Son, Sang-Im Lee, Piotr G. Jablonski, Robert J. Wood, Ho-Young Kim and Kyu-Jin Cho. "Jumping on Water: Surface Tension–Dominated Jumping of Water Striders and Robotic Insects.", Science, vol.349, no. 6247, 517-521, 2015.
6 Ryu, Seok Chang, Zhan Fan Quek, Je-Sung Koh, Pierre Renaud, Richard J Black, Behzad Moslehi, Bruce L Daniel, Kyu-Jin Cho and Mark R Cutkosky. "Design of an Optically Controlled Mr-Compatible Active Needle." Robotics, IEEE Transactions on (TRO), vol, 31, no. 1, pp. 1-11, 2015.
7 Jung, Sun-Pill, Gwang-Pil Jung, Je-Sung Koh, Dae-Young Lee and Kyu-Jin Cho. "Fabrication of Composite and Sheet Metal Laminated Bistable Jumping Mechanism.", Journal of Mechanisms and Robotics, vol. 7, no. 2, pp. 021010-021010, 2015.
8 Lee, Jong-Gu, Junghyun Ryu, Seung-Won Kim, Je-Sung Koh, Kyu-Jin Cho and Maenghyo Cho. "Effect of Initial Tool-Plate Curvature on Snap-through Load of Unsymmetric Laminated Cross-Ply Bistable Composites." Composite Structures, vol.122, pp. 82-91, 2015.
9 Seung.-Won Kim, Je-Sung Koh, Jong-Gu Lee, Junghyun Ryu, Maenghyo Cho and K.-J. Cho, “Flytrap-inspired robot using structurally integrated actuation based on bistability and a developable surface”, Bioinspir. Biomim., vol 9, no. 3, p 036004, 9 2014.
10 Ji-Suk Kim, Dae-Young Lee, Je-Sung Koh, Gwang-Pil Jung and Kyu-Jin Cho, “Component assembly with shape memory polymer fastener for microrobots”, Smart Mater. Struct., vol 23, no 1, p 015011, 1 2014.
11 Gwang-Pil Jung, Je-Sung Koh and K. Cho, “Underactuated Adaptive Gripper Using Flexural Buckling”, IEEE Transactions on Robotics (TRO), vol 29, no. 6, pp 1396–1407, 12 2013.
12 Dae-Young Lee, Je-Sung Koh, Ji-Suk Kim, Seung-Won Kim and Kyu-Jin Cho, "Deformable-wheel robot based on soft material", International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 5, pp. 1439-1445, Aug. 2013.
13 Je-Sung Koh, and Kyu-Jin Cho, "Omega-shaped Inchworm-inspired Crawling Robot with Large-Index-and-Pitch (LIP) SMA Spring Actuators", IEEE/ASME Transactions of Mechatronics (TMech), Vol. 18, No. 2, pp. 419-429, Apr. 2013.
14 Minkyun Noh, Seung-Won Kim, Sungmin An, Je-Sung Koh, Kyu-Jin Cho, "Flea-inspired catapult mechanism for miniature jumping robots", IEEE Transactions on Robotics (TRO), Vol. 28, No. 5, pp. 1007-1018, Oct. 2012.
15 Kyu-Jin Cho, Je-Sung Koh, Sangwoo Kim, Won-Shik Chu, Yongtaek Hong, Sung-Hoon Ahn,"Review of manufacturing processes for soft biomimetic robots", International Journal of Precision Engineering and Manufacturing(IJPEM), Vol. 10, No. 3, pp. 171-181, 2009. Most Cited Articles Award, 2009 to 2010.

학회논문

 

자연모사 실험실 연구실적
1 Je-Sung Koh, Daniel M. Aukes, Brandon Araki, Sarah Pohorecky, Yash Mulgaonkar, Micheal T. Tolley, Vijay Kumar, Daniela Rus and Robert J. Wood, "A Modular Folded Laminate Robot Capable of Multi Modal Locomotion", International Symposium on Experimental Robotics (ISER 2016), Tokyo, Japan, Oct., 2016
2 Yash Mulgaonkar, Brandon Araki, Je-Sung Koh, L. Guerrero-Bonilla, D. M. Aukes, A. Makineni, M. T. Tolley, D. Rus, R. J. Wood, and V. Kumar, "The flying monkey: A mesoscale robot that can run, fly, and grasp," 2016 IEEE International Conference on Robotics and Automation (ICRA), Stockholm, pp. 4672-4679, 2016
3 Je-Sung Koh, Sa-Reum Kim and Kyu-Jin Cho, “Self-folding origami using the torsion shape memory alloy wire actuators”, in ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE, 2014. Compliant Mechanisms-Application Award
4 Gwang-Pil Jung, Ji-Suk Kim, Je-Sung Koh, Sunpill Jung and Kyu-Jin Cho, “Role of Compliant Leg in the Flea-Inspired Jumping Robot”, in 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2013, To appear.
5 Je-Sung Koh and Kyu-Jin Cho, “Development of an Insect Size Micro Jumping Robot”, in Biomimetic and Biohybrid Systems (Living Machines 2014), Springer International Publishing, 2014, pp 405–407.
6 Ji-Suk Kim, Gwang-Pil Jung, Je-Sung Koh and Kyu-Jin Cho, “Meso-scale robot assembly using shape memory polymer rivet fastener” Proceedings of the IEEE International Conference on Intelligent Robots and Systems (IROS), pp. 2032, 2013. Best Conference Video Award
7 Gwang-Pil Jung, Useok Jeong, Je-Sung Koh and Kyu- Jin Cho, “The Development of a Scalable Underactuated Gripper based on Flexural Buckling”,Proceedings of the IEEE International Conference on Intelligent Robots and Systems (IROS), pp. 2077, 2013
8 Je-Sung Koh, Sun-Pil Jung, Rorbert J. Wood and Kyu-Jin Cho, “A jumping robotic insect based on a torque reversal catapult mechanism”, in 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2013, pp 3796–3801.
9 Dae-Young Lee, Ji-Suk Kim, Sa-Reum Kim, Je-Sung Koh, Kyu-Jin Cho, "The Deformable Wheel Robot using Magic-Ball Origami Structure", Proceedings of the ASME 2013 IDETC/CIE, 2013.
10 Je-Sung Koh, Sun-Pill Jung, Min-Kyun Noh, Seung-Won Kim, and Kyu-Jin Cho, "Flea Inspired Catapult Mechanism with Active Energy Storage and Release for Small Scale Jumping Robot", Proceedings of the IEEE International Conference on Robotics and Automation (ICRA), May. 2013.
11 Je-Sung Koh, Dae-Young Lee, Seung-Won Kim and Kyu-Jin Cho, "Deformable soft wheel robot using hybrid actuation", the IEEE International Conference on Intelligent Robots and Systems (IROS2012), Oct. 2012.
12 Junghyun Ryu, Jong-Gu Lee, Meanghyo Cho, Seung-Won Kim, Je-Sung Koh and Kyu- Jin Cho, "Snap-through behavior of bi-stable composite structure using SMA spring actuator", in 52nd AIAA/ASME/ASCE/AMS/ASC SDM conference, 2011.
13 Seung-Won Kim, Je-Sung Koh, Maenghyo Cho and Kyu-Jin Cho, "Design & Analysis a Flytrap Robot using Bi-stable Composite", Proceedings of the 2011 IEEE International Conference on Robotics and Automation(ICRA), 2011
14 Je-Sung Koh and Kyu-Jin Cho, "Endoskeletons using Composite Flexure Joint for BioMimetic Meso-scale Robot", Proceedings of the 2011 IEEE International Conference on Robotics and Automation(ICRA), 2011.
15 Ryu, S. Ahn, J. Koh, K. J. Cho, M. Cho, "Modified Brinson model as an equivalent one-dimensional constitutive equation of SMA spring", in Proceedings of SPIE, vol. 7981, p. 79813W, 2011.
16 Je-Sung Koh and Kyu-Jin Cho, "Omegabot: Crawling robot inspired by Ascotis Selenaria," 2010 IEEE International Conference on Robotics and Automation (ICRA), pp.109-114, 2011.
17 Seung-Won Kim, Je-Sung Koh, Maenghyo Cho and Kyu-Jin Cho, "Towards a Bio-mimetic Flytrap Robot Based on a Snap-Through Mechanism", Proceedings of the 2010 3rd IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics(BIOROB), pp.534-539, 2010. Best Student Paper Award
18 Je-sung Koh, Hong-Jip Kim, Gwang-pil Jung, Kyu-jin Cho, "Crawling robot inspired by Inchworm using SMA spring actuator and flexure joint," International Symposium on Nature-Inspired TECNOLOGY 2010.
19 Je-Sung Koh, Sung-Min An, and Kyu-Jin Cho,"Finger-sized climbing robot using artificial proleg,"in Biomedical Robotics and Biomechatronics (BioRob), 2010 3rd IEEE RAS and EMBS International Conference on, 610-615, 2010.
20 Je-Sung Koh and Kyu-Jin Cho, "Omegabot: Biomimetic Inchworm Robot using SMA coil actuator and Smart Composite Microstructures(SCM)", Proceedings of the 2009 IEEE International Conference on Robotics and Biomimetics(RoBio 2009), 2009, pp.1154-1159.

논문실적

 

자연모사 실험실 연구실적
1 E. Lee, D. Park, H. Bacc, S. Han*, “Graphene- and Carbon-Nanotube-Based Transparent Electrodes for Semitransparent Solar Cells”, Materials, 11, 1503, 2018
2 E. Lee, T. Kim, H. Suh, M. Kim, P. V. Pikhitsa, S. Han*, J. Koh*, D. Kang*, “Effect of Metal Thickness on the Sensitivity of Crack-Based Sensors”, Sensors, 2018
3 Park, J. Kwon, J. Lim, W. Shin, Y. Lee, H. Lee, H. J. Kim, S. Han, J. Yeo, S. Ko, S. Hong, “Micropatterning of Metal Nanoparticle Ink by Laser-Induced Thermocapillary Flow”, Nanomaterials, 8 (9), 645, 2018
4 Han, J. Kim, S. M. Won, Y. Ma, D. Kang, Z. Xie, K. Lee, H. U. Chung, A. Banks, S. Min, S. Y. Heo, C. R. Davies, J. W. Lee, C. Lee, B. H. Kim, K. Li, Y. Zhou, C. Wei, X. Feng, Y. Huang, J. A. Rogers, “Battery-free, wireless sensors for full-body pressure and temperature mapping”, Science Translational Medicine, 10, 435, eaan4950, 2018
5 Kim, J. Kwon, J. Jung, K. Kim, H. Lee, J. Yeo, S. Hong, S. Han*, S. H. Ko*, “Transparent and Flexible Capacitive Force Touch Pad from High Aspect Ratio Copper Nanowires with Enhanced Oxidation Resistance for Wearable Electronics Applications”, Small Methods, 1800077, 2018 [Featured on Cover (Frontispiece)]
6 H. Kim, J. Lee, S. M. Won, Z. Xie, F. Liu, J. Chang, Y. Yu, Y. Cho, H. Jang, J. Jeong, Y. Lee, A. Ryu, D. Kim, K. Lee, H. Jeong, J. Lee, X. Wang, J. Koo, S. Min, Q. Huo, D. Wu, B. Ji, A. Banks, J. Kim, S. Han, D. Kang, C. Lee, Y. Song, Y. Zhang, Y. Huang, K. Jang, J. A. Rogers, “Three-Dimensional Silicon Electronic Systems Fabricated by Compressive Buckling Process”, ACS Nano, 12, 4164-4171, 2018
7 Kwon, H. Cho, J. Jung, H. Lee, S. Hong, J. Yeo, S. Han*, S. H. Ko*, “ZnO/CuO/M (M= Ag, Au) Hierarchical Nanostructure by Successive Photoreduction Process for Solar Hydrogen Generation”, Nanomaterials, 8, 323, 2018
8 Kim, H. Lee, I. Ha, J. Jung, P. Won, H. Cho, J. Yeo, S. Hong, S. Han, J. Kwon, K. Cho, S. H. Ko, “Biomimetic Color Changing Anisotropic Soft Actuators with Integrated Metal Nanowire Percolation Network Transparent Heaters for Soft Robotics”, Advanced Functional Materials, 1801847, 2018 [Featured on Cover (Frontispiece)]
9 Kwon, Y. Suh, J. Lee, P. Lee, S. Han, S. Hong, J. Yeo, H. Lee, S. H. Ko, “Recent Progress in Silver Nanowire Based flexible/Wearable Optoelectronics”, Journal of Materials Chemistry C, 2018
10 Kwon, H. Cho, H. Lee, J. Yeo, S. Hong, S. Han, S. H. Ko, ” Perspective—A Brief Perspective on the Fabrication of Hierarchical Nanostructure for Solar Water Splitting Photoelectrochemical Cells”, ECS Journal of Solid State Science and Technology, 7, Q131-Q135, 2018
11 Cho†, S. Han†, J. Kwon, J. Jung, H. J. Kim, H. Kim, H. Eom, S. Hong, S. H. Ko, “Self-assembled stretchable photonic crystal for a tunable color filter”, Optics letters, 43 (15), 3501-3504, 2018
12 Lee, W. Manorotkul, J. Lee, J. Kwon, Y. D. Suh, D. Paeng, C. P. Grigoropoulos, S. Han, S. Hong, J. Yeo, S. H. Ko, “Nanowire-on-Nanowire: All-Nanowire Electronics by On-Demand Selective Integration of Hierarchical Heterogeneous Nanowires”, ACS Nano, 2017
13 Lee, J. Yeo, J. Lee, H. Cho, J. Kwon, S. Han, S. Kim, S. Hong, S.H. Ko, “Selective Thermochemical Growth of Hierarchical ZnO Nanowire Branches on Silver Nanowire Backbone Percolation Network Heaters”, The Journal of Physical Chemistry C, 121 (40), 22542-22549, 2017
14 H. Park†, S. Han†, D. Kim, B. K. You, S. Hong, J. Seo, J. Kwon, C. K. Jeong, H. Park, T. Kim, S. H. Ko, K. J. Lee, “Plasmonic‐Tuned Flash Cu Nanowelding with Ultrafast Photochemical‐Reducing and Interlocking on Flexible Plastics”, Advanced Functional Materials, 27 (29), 2017
15 Lee, J. Kwon, W.S. Shin, H.R. Kim, J. Shin, H. Cho, S. Han, J. Yeo, S. Hong, “Large-Area Compatible Laser Sintering Schemes with a Spatially Extended Focused Beam”, Micromachines, 8(5), 153, 2017
16 Choi, D. Kang, S. Han, S. Kim, J. A. Rogers, “Thin, soft, skin-mounted microfluidic networks with capillary bursting valves for chrono-sampling of sweat”, Advanced Healthcare Materials, 2017, DOI: 10.1002/adhm.201601355
17 Kim, P. Gutruf, A. M. Chiarelli, S. Y. Heo, K. Cho, Z. Xie, A. Banks, S. Han, K. I. Jang, J. W. Lee, K. T. Lee, Y. Huang, M. Fabiani, G. Gratton, U. Paik, and J. A. Rogers, "Miniaturized Battery‐Free Wireless Systems for Wearable Pulse Oximetry", Advanced Functional Materials, 2017, DOI: 10.1002/adfm.201604373
18 T. Lee, Y. Yao, J. He, B. Fisher, X. Sheng, M. Lumb, L. Xu, M. Anderson, S. Han, Y. Kang, A. Gumus, R. R. Bahabry, J. W. Lee, U. Paik, N. D. Bronstein, A. P. Alivisatos, M. Meitl, S. Burroughs, M. M. Hussain, J. Lee, R. G. Nuzzo and J. A. Rogers, “Concentrator photovoltaic module rchitectures with capabilities for capture and conversion of full global solar radiation”, Proceedings of the National Academy of Sciences, 113(51), E8210-E8218, 2016
19 Han, M. Kim, B. Wang, D. Wie, S. Wang, C. H. Lee, “Mechanically Reinforced Skin Electronics with Networked Nanocomposite Elastomer”, Advanced Materials, 28(46), 10257-10265, 2016 [Featured in Ajou and Purdue News]
20 Koh, D. Kang, Y. Xue, S. Lee, R. M. Pielak, J. Kim, T. Hwang, S. Min, A. Banks, P. Bastien, M. C. Manco, L. Wang, K. R. Ammann, K. Jang, P. Won, S. Han, U. Paik, M. J. Slepian, G. Balooch, Y. Huang, J. A. Rogers, “A soft, wearable microfluidic device for the capture, storage, and colorimetric sensing of sweat”, Science Translational Medicine, 8(366), 366-379, 2016 [Featured on Cover (Frontispiece)]
21 Han, S. Hong, J. Yeo, D. Kim, B. Kang, M.-Y. Yang, S.H. Ko, “Nano-recycling: monolithic integration of copper and copper oxide nanowire network electrode through selective reversible photo-thermo-chemical reduction”, Advanced Materials, 27(41), 6397-6403, 2015 [Featured on Cover (Frontispiece)]
22 Han, S. Hong, H. W. Kang, M. Wanit, B. Kang, S. H. Ko, “Hybrid Subtractive Micro-patterning of Self-Assembled SiO2 Nano/microsphere Monolayer”, Journal of Micromechanics and Microengineering, 25(10), 105006, 2015
23 Hong, H. Lee, J. Lee, J. Kwon, S. Han, Y. Suh , H. Cho , J. Shin , J. Yeo, S. H. Ko, “Highly Stretchable and Transparent Metal Nanowire Heater for Wearable Electronics Applications”, Advanced Materials, 27(32), 4744-4751, 2015
24 K Jeong, J. Lee, S. Han, J. Ryu, G. T. Hwang, D. Y. Park, J. H. Park, S. S. Lee, M. Byun, S. H. Ko, K. J. Lee, “A Hyper-Stretchable Elastic-Composite Energy Harvester”, Advanced Materials, 27(18), 2866–2875, 2015
25 Han, S. Hong, J. Ham, J. Yeo, J. Lee, B. Kang, P. Lee, J. Kwon, S. S. Lee, M.Y. Yang, S. H. Ko, “Fast Plasmonic Laser Nanowelding for a Cu-Nanowire Percolation Network for Flexible Transparent Conductors and Stretchable Electronics”, Advanced Materials, 24(36), 5671-5678, 2014. [Featured on Cover (Backcover)]
26 Park, J. Park, C. Rodriguez, H. Yu, M. Kim, K. Jin, S. Han, J. Shin, S. H. Ko, K. T. Nam, Y. Lee, Y. Cho and Y. Park, “Full-field sub-wavelength imaging using a scattering super-lens”, Physical Review Letters, 113, 113901, 2014.
27 Lee, J. Ham, J. Lee, S. Hong, S. Han, Y.D. Suh, S.E. Lee, J. Yeo, S.S. Lee, D. Lee, S.H. Ko, “Highly stretchable or transparent conductor fabrication by hierarchical multiscale hybrid nanocomposite”, Advanced Functional Materials, 24(36), 5671-5678, 2014
28 An, S. Hong, S. Han, H. Lee, J. Yeo, S.H. Ko, “Selective sintering of metal nanoparticle ink for maskless fabrication of electrode micropattern using spatially modulated laser beam by a digital micro mirror device”, ACS Applied Materials & Interfaces, 6(4), 2786-2790, 2014.
29 Hong, J. Yeo, M. Wanit, H.W. Kang, J. Lee, S. Han, Y.D. Suh, H.J. Sung, S.H. Ko, “Digital Selective Growth of ZnO Nanowire Array by Large Scale Laser Decomposition of Zinc Acetate”, Nanoscale, 5(9), 3698-3703, 2013.
30 -H. Park, C. Park, H. Yu, J. Park, S. Han, J. Shin, S.H. Ko, K.T. Nam, Y.-H. Cho, Y.K. Park, “Subwavelength light focusing through random nanoparticles”, Nature Photonics, 7, 454-458, 2013.
31 Rho, M. Wanit, J. Yeo, S.J. Hong, S. Han, W.-H. Hong, D. Lee, S.H. Ko, “Improvement of Light-Harvesting Efficiency in Dye Sensitized Solar Cell Using Silica Beads Embedded in TiO2 Nanoporous Structure”, J. Phys.D: Appl. Phys. (Special Issue, NanoPV), 46, 024006, 2013.
32 W. Kang, J. Yeo, J. O. Hwang, S. Hong, P. Lee, S. Han, J. H. Lee, Y. S. Rho, S. O. Kim, S. H. Ko and H. J. Sung, “Simple ZnO Nanowires Patterned Growth by Microcontact Printing for High Performance Field Emission Device”, The Journal of Physical Chemistry C, 115 (23), 11435-11441, 2012.
33 C. Kang, S. Han, J. Kim, S.H Ko, M.Y Yang, “One-step fabrication of copper electrodes by laserinduced direct local reduction and Agglomeration of copper oxide nanoparticle”, Journal of Physical Chemistry C, 115(48), 23664-23670, 2011.

International Conference Proceedings

 

자연모사 실험실 연구실적
1 Tran, S. Han, R. Caldwell, J. A. Rogers, S. Fatone, “Ability of skin-like sensors to measure to measure lower limb temperature during activity with a prosthesis simulator”, American Academy of Orthotists and Prosthetists, March 1-3, 2017, Chicago, IL, USA
2 Han, S. Hong, H.W Kang, M. Wanit, J. Kwon, S. H. Ko, “Direct Patterned Transfer Process of Colloidal Self-Assembled Monolayer using SiO2 Nanosphere”, Material Research Society (MRS) Fall Meeting, Nov. 30-Dec.5, 2014, Boston, MA, USA.
3 Kwon, J. Yeo, S. Hong, S. Han, H. Lee, Y. D. Suh, S. H. Ko, “Facial synthesis method of plasmon enhanced hematite/Ag hybrid nanostructure forsolar water splitting”, Material Research Society (MRS) Fall Meeting, Nov. 30-Dec.5, 2014, Boston, MA, USA.
4 Hong, J. Yeo, J. Kwon, S. Han, H. Lee, J. Lee, S. H. Ko, “Laser Assisted Fabrication of All Nanowire UV Sensor in Solution Environment”, Material Research Society (MRS) Fall Meeting, Nov. 30-Dec.5, 2014, Boston, MA, USA.
5 Han, S. Hong, J. Ham, J. Yeo, J. Lee, Y. D. Suh, S. H. Ko, “Transparent Conductor by Copper Nanowire Percolation Network with Laser Nanowelding Process in Ambient Condition”, Material Research Society (MRS) Spring Meeting, April 21-25, 2014, San Francisco, CA, USA.
6 Hong, J. Yeo, J. Lee, H. Lee, Y. D. Suh, S. Han, J. K, H. S. Lee, S. H. Ko, “Direct Patterning of Metal Nanowire Percolation Network Transparent Conductor by Selective Laser Ablation (LL5.51)”, Material Research Society (MRS) Spring Meeting, April 21-25, 2014, San Francisco, CA, USA.
7 Yeo, S. Hong, J. Kwon, J. Lee, S. Han, Y. D. Suh, H. Lee, D. Lee, S. H. Ko, “Digital Direct Metal Patterning Process for Rapid, Low-temperature and High Resolution Metal Patterning and Its Application to Organic Field Effect Transistor (M7.28)”, Material Research Society (MRS) Spring Meeting, April 1-5, 2013, San Francisco, CA, USA.
8 Lee, H. Lee, J. Yeo, S. Hong, J. Kwon, S. Han, Y. D. Suh, S. H. Ko, “Aluminaum Paper Fabrication for Flexible Electronics Using Low Temperature Decomposition of Precursor Ink (M7.29)”, Material Research Society (MRS) Spring Meeting, April 1-5, 2013, San Francisco, CA, USA.
9 Yeo, I. Herman, S. Hong, J. Kwon, J. Lee, S. Han, M. Wanit, Y. D. Suh, P. Lee, K. H. Nam, S. H. Ko, “Rapid and one step selective synthesis of Zinc oxide nanowires using laser induced hydrothermal growth”, Material Research Society (MRS) Fall meeting, November 26-30, 2012, Boston, MA, USA.
10 Lee, J. Yeo, S. Hong, S. Han, Y. D. Suh, J. Kwon, D. Lee, Y. Noh, S. H. Ko, “PEDOT:PSS - Silver Nanoparticle Composite for a Flexible Transparent Conductor”, Material Research Society (MRS) Spring meeting, April 9-13, 2012, San Francisco, CA, USA.
11 Han, B. Kang, D. Lee, P. Lee, J. Yeo, S. Hong, J. Kwon, J. Lee, Y. Noh, Y. D. Suh, S. H. Ko, M. Y. Yang,“Single Material Based Cost-effective Field Effect Transistor via Laser Induced Direct Reduction and Sintering”, Material Research Society (MRS) Spring meeting, April 9-13, 2012, San Francisco, CA, USA.

빠른 이동 메뉴

quick
  • potal
  • 중앙도서관
  • E클래스
  • 학사정보
  • 장학정보
  • 증명서발급
  • 취업정보
  • 헬프데스크
  • ABEEK(공학인증)
  • ABEEK(공학인증)
글자화면확대화면축소top
아주대학교
  • 우)16499 경기도 수원시 영통구 월드컵로 206 아주대학교 기계공학과 대표전화:031-219-2324
  • COPTRIGHT(C)2013 Collage of Mechanical Engineering. All Right Reserved.
  • 담당자에게 메일 보내기[새창열림]